• Highest available accuracy (+/- 0.05% worst case) helps you ensure the highest possible product quality
• Non-contact length and speed measurement technique ensures no damage to product
• Permanently calibrated for production line simplicity and maximum uptime
• No moving parts eliminates need for on-going maintenance
• Flexible output options to interface and integrate into any system

Adding the LaserSpeed 4100 Gauge to your production line is simple.

Just remove the existing encoder(s), and drop in
the LaserSpeed 4100 in place. Make quadrature or pulse output connections from the LaserSpeed to your existing control system, ensure that the LaserSpeed is installed at an appropriate standoff distance, and configure the setting for pulses per foot/meter, as desired. Connect the LaserSpeed to power, turn it on, and start measuring immediately.

To further improve the process a second LaserSpeed can be added to measure the final length after the curing process. This does two things, it provides the manufacturer with 100% quality inspection and allows the process to be adjusted so the correct length is produced at the cutter. LaserSpeed gauges can easily be
integrated into quality control systems such
as Datamyte's AppStats.

For dirty production line environments, an
optional air-wipe or quick-change window may be recommended to ensure measurement accuracy. Discuss this or any other concerns you may have with your Beta LaserMike Sales Representative.

• Analog Converter: Converts 0 to 2VDC speed output to; 0 to 10VDC, 0 to 5VDC,
  +/- 10VDC, +/-5VDC, 0 to 20 mA, 4 to 20 mA
• Hot Object Filter: For products over 500ºC
• Air Wipe: Helps keep window clean in dirty environments
• Quick Change Window: For easy cleaning and maintenance of the window
• Sensor Cable: 3m, 10m, 20m, 30m, 50m lengths
• Terminal Block: Breakout box for sensor cable

• Wheel wear–causing frequent calibrations (ie downtime)?
  Debris being picked up on
• the wheel changing its diameter?
  Complicated and expensive fixtures to allow
• it to maintain contact with the board, which also takes of a lot of
• space?
  Lack of durability because of the contact with the boards?

This measurement system can do even more.
For example, do you also need help measuring boards during other phases of  production? The LaserSpeed 4100 can help you:

• Measure the speed and length of the board material as they are manufactured 
• Measure the length of individual boards as part of a quality logging system

To find out more about how the LaserSpeed 4100 Gauge can help you dramatically reduce product giveaway, contact the Beta LaserMike office nearest you.